8/30/2021 0 Comments Using Advanced Cable and Pipe Locating Services to Ensure the Integrity of Your Underground Utilities during Excavation and ConstructionFor cable and pipe locating, utility locating technologies measure electrical conductivity, magnetism, rigidity, and other parameters. Some of these properties may be altered or improved by the company providing pipe location services, who may use miniature transmitters, conductors, and other means to better distinguish the underground utility from its environment and make it easier to detect. The most commonly used instruments for cable and pipe locating are pipe and cable locators. Lower frequency locators can penetrate deeper into the ground, but they require more power. The use of low frequency by pipe location services, on the other hand, tends to excite other nearby conductors, increasing the likelihood of a correct interpretation. Higher frequency is required for less conductive utilities to propagate over long distances. However, at a lower frequency, the signal will travel a shorter distance. Utilities that are buried deep and have poor conductivity are one of the most difficult aspects of cable and pipe locating. These include cast iron pipes with a large number of non-welded joints. Pipe location services, as a result, require specialised instruments and tools to detect all such difficult-to-find utilities. Pipe and cable locators can detect and trace utilities buried up to 20 feet underground. Sonders, in conjunction with pipe and cable locators, may be used by cable and pipe locating services to increase their effective depth of penetration to 50 feet or more. GPR and Lidar for detecting underground utilities Aussie Hydro-Vac Services uses advanced technologies such as ground penetrating radar to provide the most accurate cable and pipe locating services (GPR). For its cable and pipe locating services, its trained operators combine successive scans to create a tomographic image of underground cables and pipes. The company's pipe location services enable surveyors and other professionals to effectively use GPR technology for cable and pipe locating. Aussie Hydro-Vac Services technicians providing pipe location services can capture above and below ground scans simultaneously using Lidar (light detection and ranging) and GPR to create a complete 3D model of all existing underground infrastructure, greatly facilitating planning, design, and construction. Using an electromagnetic (EM) detection wand in combination with GNSS and digital capture, the company's technicians can keep an accurate record of cable and pipe locating services. Road salt used for deicing is absorbed into the soil surrounding the roadway, increasing ground conductivity. This can make it difficult for cable and pipe locating services to detect a metallic utility while also making pipe locating services detect a non-metallic utility easier. In areas with high moisture or a high water table, detecting any kind of utility may be impossible unless it is large, relatively shallow, empty, or watertight. Terrain conductivity or TC method Pipe location services detect such utilities using the terrain conductivity (TC) method. The TC method can be used to locate septic systems, particularly in dry soil. The TC method may also be used to locate buried tanks, vault covers, and wall shafts. To locate metallic utilities in a non-congested, dry environment, TC can be an effective tool for cable and pipe locating. However, interpreting data from TC is more difficult than interpreting data from pipe and cable locators. Aussie Hydro-Vac Services utilises technicians who are well-versed in interpreting TC data. Although data can be interpreted remotely by another operator, accurate positional data must be available at all times during data collection in order for TC data to be relied on. The TC method's success in utility detection is frequently limited to 20 feet. Using high pressure water jetting Aussie Hydro-Vac Services offers pipe location services in Brisbane, the Gold Coast, and other parts of Australia, employing a wide range of cable and pipe locating equipment and technologies. The information obtained from cable and pipe locating is provided to building managers, who can use it for records management, excavation planning, and infrastructure development. Aussie Hydro-Vac Services offers a variety of nozzle options for pipe location services that use high pressure water jetting to do underground excavation without damaging underground cables, pipes, and other underground utilities. CCTV inspection surveys for testing and evaluating the condition of pipes and cables for pipe location services and drainage systems eliminate the need for digging and cutting whenever checking the condition is required. Aussie Hydro-Vac Services' technology provides a clear picture for cable and pipe locating services to assess ongoing maintenance work. Nondestructive digging for locating utilities Apart from pipe location services, Aussie Hydro-Vac Services also offers drain and culvert cleaning, vacuum excavation and non-destructive digging, industrial cleaning and shutdown, emergency response spills, industrial marine services, and more. Aussie Hydro-Vac Services provides a variety of technical services, including geotech and pavement investigation, subsurface engineering and maintenance, drone photography, and more. For utility detection and non-destructive digging, the company employs a variety of equipment and vehicles, including an all-terrain medium vacuum excavation unit, a tight access vacuum excavation unit, CCTV and geotech vans, and Kaiser recycling unit, and more.
0 Comments
8/30/2021 0 Comments Waste Disposal and Industrial Emergency Response Services to Keep You Compliant and Environmentally-ResponsibleNon-destructive excavation process facilitates digging, trenching, and installation of structures in a manner that does not cause damage to underground utilities and infrastructure. Also known as vacuum excavation, soft digging, potholing and hydro digging, this non-destructive excavation method uses high-pressure water jets and vacuums to move and loosen the soil particles. Non-destructive excavation is an ideal method for digging any type of ground including hard-packed clay, ice, sand, and gravel. The method can be used to excavate frozen ground and can be used in other challenging soil conditions. The non-destructive excavation method is employed in Australia for a variety of digging applications such as:
Non-destructive excavation using hydro-vac technique provides better damage and safety control when compared to traditional digging methods involving the use of shovels, mechanical tools, and a lot of manual labour. As non-destructive excavation safely exposes underground utilities without damaging them, a lot of additional cost is saved in repairs. Excavating in congested areas Non-destructive excavation ensures workers’ safety from machinery accidents and construction mishaps. As a non-destructive excavation method is highly accurate and precise, there is lesser destruction of the area. It also reduces traffic and congestion at the excavation site as the equipment and hydraulic trucks can be positioned at a distance, especially while excavating in congested areas. Keeping the area and surroundings clean Both excavated area and materials are left clean and dry at the completion of the non-destructive excavation process. As the process does not involve the use of any chemicals, it is environmentally-friendly. With fewer repairs required and minimised safety risks to workers, the excavation site and surrounding areas, the non-destructive excavation method also reduces insurance and liability costs for your company. Industrial emergency response services When you operate an industrial facility, unforeseen situations such as the spilling of hazardous liquid can occur, even if you have safeguards in place. The waste can create unwanted downtime and costs and may call for an industrial emergency response. An industrial emergency response may be called for due to an unforeseen natural disaster. Even waste classified as non-hazardous can have terrible effects on the environment or community if not controlled. Even one poorly handled industrial spill incident can have disastrous consequences for your company and your reputation. With its extensive network of waste disposal services, qualified personnel and technicians, and versatile vehicles equipped with the newest functionalities, capabilities, tools and features, Aussie Hydro-Vac Services is well-equipped to handle any request for an industrial emergency response. The company has well-trained staff and critical equipment to provide the most efficient industrial emergency response for a wide variety of situations. Aussie Hydro-Vac Services has the equipment, tools, trucks, resources, and expertise in industrial emergency response to clean up spills and remove the waste from your property quickly. The company provides liquid waste management, liquid waste disposal services and waste recovery solutions for industries, businesses and households in various parts of Australia covering South East Queensland, Northern NSW, Western and Central Queensland. Industrial and technical waste disposal services Industrial waste disposal services offered by Aussie Hydro-Vac Services include drain and culvert cleaning, vacuum loading and excavation, road sweeping, solid and liquid waste disposal, and more. Technical waste disposal services offered include geotechnical and pavement investigation, cable & pipe location, subsurface engineering & maintenance, CCTV inspection, drone photography services, and more. Aussie Hydro-Vac uses the most suitable and appropriate vehicles for its waste disposal services which come with all the latest features to allow the operators to provide non-destructive excavation, industrial emergency response and waste disposal services in a highly cost-effective manner. The equipment available at Aussie Hydro-Vac Services include a Cap combi drain cleaning unit, Kaiser recycling unit, All-terrain medium vacuum excavation units, Kroll drain cleaning unit, emergency response vehicles, and more. Custom solutions for waste disposal and management Your company is likely not specialised in excavation and digging, or waste disposal services and management, while it is our core business at Aussie Hydro-Vac Services. When you partner with Aussie Hydro-Vac Services, you can develop a custom solution for non-destructive excavation, waste disposal service, industrial emergency response, and other waste management solutions. Partner for peace of mind Aussie Hydro-Vac Services is one of the largest processors of residential, commercial, and industrial wastes in Australia with a strong reputation for using the safest and most efficient methods for waste disposal services. Aussie Hydro-Vac Services uses recycling techniques so that the maximum amount of waste is either reused or recycled. By partnering with Aussie Hydro-Vac Services, you have the peace of mind that you are environmentally responsible and compliant with your waste. 8/24/2021 0 Comments Drone and Construction Surveying to Optimise Project Costs and Improve Efficiency with Real-Time and Accurate DataDrone surveying plays a significant role in the construction industry. Construction managers use drone surveying to obtain up-to-date images of a construction site as needed. Builders can get a better sense of how the project is progressing this way. It helps builders in developing better plans and monitoring any issues that arise during the course of a construction project. A drone can easily access any area that would otherwise be difficult to access due to poor road connectivity, congestion, or a piece of undeveloped land. A well-trained operator will use the drone to capture video and send it in real time to computer mapping software. Drone surveying has proven to be extremely useful in construction and building surveys. The use of drones throughout a construction project provides an unparalleled record of all activities, helps in reducing planning costs as the planners have actual, real-time data in hand, and increases efficiency and accuracy. Companies involved in building and managing large infrastructure in Australia, such as industrial complexes, roads, bridges, airports, oil & gas operations, power complexes and water reservoirs, use drone surveying to optimise their operations and reduce costs. Industrial-grade drone surveying services Aussie Hydro-Vac Services offers industrial-grade drone surveying services in new and exciting ways. The company uses advanced technologies for drone surveying, mapping, inspections and other photography and filming services that ordinarily require a lot of manual effort and time. Thanks to the advanced tools, equipment and experienced technicians, drone surveying by Aussie Hydro-Vac Services can be completed at a fraction of the cost by just an experienced UAV technician. Aussie Hydro-Vac Services has extensive experience in drone surveying, construction surveying, Brisbane surveying, and CCTV inspections, all of which are carried out to consistently high professional standards. Aussie Hydro-Vac Services offers surveying services in Brisbane to meet your specific needs, ranging from property photography to large-scale industrial drone surveying and construction surveys. The drones used by Aussie Hydro-Vac Services for drone surveying, construction survey and surveying in Brisbane are equipped with high-resolution cameras that are capable of both still images and videos. Gain access to accurate information and insights Surveying in Brisbane is important not only for design and planning, but also for identifying potential issues that may arise during renovations or construction. Construction surveys provide foresight, ensuring that your project is completed with minimal errors or oversights. Construction surveys by the company’s team performing surveying in Brisbane provide an excellent overview of a project’s parameters and equip the site managers, supervisors and builders with the data, information and insight they need to complete their work. Whether you need construction survey or surveying in Brisbane for a subdivision, estate planning, or building renovation, the operators of Aussie Hydro-Vac Services can help businesses, industries and individuals with their professional surveying services including drone surveying throughout Brisbane, Gold Coast and beyond. CCTV surveys, and geotechnical and pavement investigations The company offers CCTV surveys for surveying in Brisbane to test and evaluate the condition of pipes and drainage systems, eliminating the need for digging and cutting whenever the condition needs to be checked. Prior to laying the foundation for any building work, a geotechnical and pavement investigation should be performed. This helps in determining the suitability of the structure. Aussie Hydro-Vac Services provides geotechnical and pavement investigation services such as test pitting, cone penetration testing, augering, tube sampling, on-site soil sampling, and material classification. Tailored solutions for preventive subsurface maintenance Aussie Hydro-Vac Services offers tailored solutions for preventive subsurface maintenance to reduce depreciation, avoid unplanned maintenance issues and risk of failures to subsurface utilities. This includes inspecting, detecting, and commenting on performance, as well as monitoring a customised maintenance plan. This will ensure that subsurface utility assets are well-maintained, operate effectively under normal conditions, and preventive correction plans are implemented before a failure. Subsurface engineering and maintenance services provided by Aussie Hydro-Vac Services include Swale excavation, CCTV investigation for construction surveys, vacuum waste removal, and jet clean. Hydro excavation services utilising the latest equipment Aussie Hydro-Vac Services' construction surveys and surveying in Brisbane services include cable and pipe location in Brisbane, Gold Coast, and other areas throughout Australia, using cutting-edge surveying equipment such as drone surveying and construction surveys. Understanding existing underground assets can be extremely beneficial for hydro excavation and infrastructure development. A range of nozzle choices is available that are designed for high-pressure jetting based on the material that’s being excavated. Other industrial services offered by Aussie Hydro-Vac Services include vacuum loading, industrial marine services, gross pollutant traps, culvert cleaning, emergency response & spills, and more. The company conducts construction surveys, drone surveys, and other types of surveying in Brisbane using cutting-edge equipment such as CCTV and Geotech vans, tight access vacuum excavation unit, all-terrain excavation unit, emergency response vehicles, and more. 8/23/2021 0 Comments Shutdown Maintenance and Waste Removal Services to Your Exacting Requirements that Result In Minimum Disruption to Your ProductionIndustrial cleaning services are specialised cleaning services that are often used by industrial facilities, warehouses, power plants, distribution centres, manufacturing plants, factories and self-storage buildings, among others. Because many industrial environments are busy, high-traffic places, dirt and debris can quickly accumulate. As a result, industrial cleaning services entail performing a thorough, consistent cleaning using specialised cleaning tools and techniques. In contrast to janitorial services which provide cleaning and sanitisation purposes to maintain safe and tidy spaces, industrial cleaning services involve heavier cleaning tasks in more complex and dynamic environments with people and parts moving around. It requires professionally deep cleaning spaces that require special equipment, well-trained staff and cleaning methods. Aussie Hydro-Vac Services provides specialised industrial cleaning services with well-trained staff who provide industrial cleaning services with minimal or no interruption to production. In industrial facilities, the company uses specialised equipment to clean and sanitise surfaces, equipment, tools, and electronic devices. The company provides you the flexibility to schedule its industrial cleaning services around your production schedules. Aussie Hydro-Vac Services provides the following key industrial cleaning services:
Safe and compliant cleaning procedures Aussie Hydro-Vac Services follows safe cleaning procedures and obtains all confidentiality clearances for its industrial cleaning services. The majority of industrial facilities are massive, with large machinery and equipment that is difficult or impossible to clean using traditional cleaning methods. During shutdown maintenance services, Aussie Hydro-Vac Services uses the right products, industrial cleaning technology, and green cleaning tools to keep your facility and critical equipment operational. Cleaning services adhering to strict standards Deadlines do not tolerate unexpected downtime, so Aussie Hydro-Vac Services provides you with a range of shutdown maintenance services that help increase your asset efficiency while adhering to strict environmental and EHS requirements. Aussie Hydro-Vac Services understands that time lost is money lost, and inefficient shutdown maintenance service has an impact on both. It provides shutdown maintenance services that reduce shutdown time and costs, without compromising on safety and quality, while increasing asset performance. Shutdown maintenance services offered by Aussie Hydro-Vac Services include:
Whether you need shutdown maintenance services for major shutdowns, emergency repairs, or project tie-ins, Aussie Hydro-Vac Services' teams plan, schedule, and execute shutdown maintenance services of all sizes using a disciplined, multi-phase approach. Aussie Hydro-Vac Services can keep your shutdown maintenance service costs under control by efficiently managing equipment and training on-site and ensuring that critical and reliable equipment is always available. The company has trained operators to handle any type of solid waste disposal, liquid hazardous waste and other waste removal services. From the disposal of small hazardous waste such as aerosols and batteries to the management of low-level radioactive materials, Aussie Hydro-Vac has the right equipment and technical know-how to deal with any shutdown maintenance service requirement, solid waste disposal, and provide waste removal service safely and in a compliant manner. As part of its specialised waste removal services, it can decontaminate and clean all types of plants, structures, and equipment both internally and externally. Performing waste removal services to your exacting requirements Aussie Hydro-Vac Services is trusted for its solid waste disposal, waste removal services and, industrial shutdown maintenance services as the company’s operators take excellent care of your equipment and collaborate with your management team to ensure that all shutdown maintenance services are completed to your exact requirements. To ensure that the shutdown runs smoothly, the company can deploy safety experts on-site for the duration of the shutdown maintenance service to maintain equipment and provide training. Restoring assets to original condition in minimum time Because solid waste disposal, industrial cleaning services, shutdown maintenance services, and waste removal services are highly specific to each location, the company's operators conduct a thorough site assessment and solution development in collaboration with the clients. Industrial cleaning, shutdown maintenance, solid waste disposal, and waste removal services provided by the company range from marine applications on freight ships to land-based tanks and mining facilities. The company's industry-specific solid waste disposal and waste removal services use the most advanced equipment in high pressure industrial cleaning services to restore assets to their original condition in the shortest amount of time, with vacuum loading vehicles for solid waste disposal to an appropriate disposal location. Aussie Hydro-Vac Services' fleet for industrial cleaning, waste removal, and shutdown maintenance includes the most powerful hydrovac excavation and suction trucks from Germany and Italy, as well as solid waste disposal and liquid waste disposal transport vehicles manufactured at the company's own engineering plant in Northern NSW. Aussie Hydro-Vac Services also offers services for CCTV drain inspection, geotechnical pavement investigation, cable and pipe location, liquid waste disposal, gross pollutant traps, emergency response spills, non-destructive digging, and more. The company provides its services throughout Queensland, NSW, Brisbane, Gold Coast and other regions of Australia. 8/9/2021 0 Comments Your Trusted Partner for Hydro Excavation, Pipe Location Services and Non-Destructive Vacuum Digging ServicesLocating underground facilities and subsurface utilities is always necessary in construction projects. Performing digging without damaging these subsurface utilities, such as cables, pipes, and lines, etc., is not easy with traditional digging methods. However, thanks to an innovative hydro excavation technique, excavation work can now be completed without causing damage to your vital utilities and infrastructure, and with minimal disruption to the surrounding environment. As a result, the vacuum digging method eliminates the high costs associated with repairs and restoration. Because the utilities are not damaged, you will need to make fewer repairs, which means the excavation job will be completed faster and more cost-effectively.
Hydro excavation equipment uses high-pressure water and air vacuum for its vacuum digging operations. The system cuts through the soil and breaks it up. The vacuum then lifts the slurry and debris is transferred to a debris tank for disposal to a safe location or can be used for backfilling as well. Hydro excavation equipment requires a vacuum source to execute vacuum digging. For this, it can use either a fan system or a positive displacement blower. The fan system moves air in large amounts and allows for faster excavations. The process is easier to operate and control. On the other hand, a displacement blower can move the air to further distances than the fan system. Displacement blowers allow for vacuum digging at greater depths but at a slower speed compared to a fan system. Most hydro excavation works can be done using a fan system as this vacuum digging method is lighter, effective, and less expensive compared to positive displacement blowers. Benefits of hydro excavation and vacuum digging
Pipe location and sewer rehabilitation services Pipe location services and sewer rehabilitation are other useful applications of hydro excavation. Pipes can be of many types, such as gas pipes, water pipes or oil pipes. For ensuring the safety of these pipes and other utilities, you should consider hiring professional pipe location services who can ensure that these utilities are not damaged. Having experts at the site can save you from trouble and unexpected costs later on. Aussie Hydro-Vac Services uses the latest equipment for its pipe location services, such as Ground Penetration Radar (GPR), Electromagnetic Conductivity (EM) instrument, and frequency locators, to find the location of pipes and other underground utilities. GPR can be used in pipe location services to detect metallic as well as non-metallic pipes. EM is used in pipe location services to trace and identify sewers or other non-metallic ducts or pipes to which there is access. EM can also locate blockages and collapses in pipes. Pipe location services by Aussie Hydro-Vac Services can also make use of introducing ultra-sonic waves into the ground for visuals. The technique is used for tracing plastic water pipes. Advanced equipment and techniques for excavation If you are looking for a company that can provide you hydro excavation, vacuum digging and pipe location services, Aussie Hydro-Vac Services is your perfect partner. The company uses advanced equipment and techniques for vacuum digging, hydro excavation and pipe location services that ensures that there is minimum disruption to the surroundings, and your site will remain clean as less debris is generated. Whatever debris is generated, it is either used for backfilling or sent to a recycling facility or landfilling for disposal in a compliant and safe way. Aussie Hydro-Vac Services also provides a range of industrial and technical services including drain and culvert cleaning, gross pollutant traps, road sweeping, drone photography services, geotech and pavement investigation, and more. 8/2/2021 0 Comments Geotechnical Services, Gross Pollutant Traps and Non-Destructive Digging Methods That Deliver Value and Efficiency to Your ProjectsBecause the ground for building and infrastructure projects may consist of various types of soils and structures such as the foundation, land reclamation, excavation pit, and so on, geotechnical testing service should be contacted to assist construction engineers with data collection, laboratory testing, field investigation and sampling, and geotechnical investigation report. Types of foundations include piles, drilled shafts, piers, caissons, and earth stabilised columns. Knowledge of these ground foundations is crucial for the feasibility and durability of a construction project.
Geotechnical testing is performed by geotechnical engineers, geotechnical technicians, or engineering geologists to collect data about the physical properties under a worksite. Geotechnical testing services help building engineers in determining the suitability of the ground for a construction project, and for identification and marking of underground services as well as sampling and testing of different kinds of soils and rocks. Aussie Hydro-Vac Services provides its geotechnical testing services with respect to project specifications such as type and difficulty of structure, expected ground conditions, geotechnical site investigations, groundwater sampling, and more. Undisturbed samples are taken at certain intervals to the borehead depth termination, and at the change of strata in borehole. Disturbed samples can be derived from selected recovered cores of standard penetration test (SPT). Undisturbed sampling using the open-tube sample as thin-walled or thick-walled tube samplers can be applied by the geotechnical testing service team, depending upon the soil conditions encountered. SPT and CPT tests Standard Penetration Test (SPT) is performed in boreholes by a geotechnical testing services team in order to estimate consistency, relative density, and strength-deformation parameters of soils. SPT is performed at certain numbers and intervals to the borehole depth termination for all boreholes. Cone Penetration Test (CPT) can be performed by Aussie Hydro-Vac Services’ geotechnical testing service team to effectively evaluate the site characterisation. CPT is a valuable method to assess subsurface stratigraphy associated with organic soils, discontinuous lenses, soft materials, potentially liquefied materials, and strata containing cobbles and boulders. Geotechnical laboratory testing Geotechnical laboratory testing done via geotechnical testing services includes index property tests for the classification of soils, and engineering properties tests to determine the strength and deformation methods. Also, rock strength properties tests and chemical analysis of groundwater is performed by Aussie Hydro-Vac Services’ geotechnical testing service team within the scope of its geotechnical investigations. Geotechnical investigation services provided by Aussie Hydro-Vac Services include test pitting, tube sampling, augering, pavement and asphalt reinstatement, site characterisation, laboratory testing and professional interpretation of data obtained for site improvement. Gross pollutant traps Gross pollutant traps are structures that use physical processes to trap solid waste such as litter and coarse sediments. They are commonly used as the primary treatment method as the traps mostly remove large, non-biodegradable pollutants. These filtration systems are designed to prevent stormwater pollution from entering the waterways. These are usually designed to catch the larger trash, debris and larger sedimentation. Gross pollutant traps are most commonly used as part of a treatment train with other stormwater treatment measures, such as wetlands or bio-retention systems. A variety of gross pollutant traps can be used by Aussie Hydro-Vac Services based on your requirement but all of them trap litter and sediments above 5 mm in size for removal from the water system. Advantages of gross pollutant traps The advantage of gross pollutant traps is that they have a relatively small lateral footprint and are hidden from view. The traps also remove non-biodegradable, larger pollutants that would restrict, clog or block the flow of water in the downstream system. These are commonly installed with secondary or tertiary systems as a treatment train as gross treatment pollutants cannot remove fine sediments, dissolved and attached pollutants. Most gross pollutant traps are suited to pre-treatment of small to medium-sized systems but these are not effective in removing nutrients, and provide limited removal of fine sediment and dissolved pollutants. Aussie Hydro-Vac Services is servicing all types of gross pollutant traps in a variety of settings including tunnels, mills, restaurants, airports, shopping malls and through council contracts. Non-destructive digging services In addition to gross pollutant traps and geotechnical investigation services, Aussie Hydro-Vac Services also offers non-destructive digging services for various construction projects in Australia. The company uses the best-in-class equipment and tools for non-destructive digging that ensures that there is minimum damage to the underground utilities and infrastructure, while the surroundings remain relatively clean. Non-destructive digging is an environment-friendly method as it creates less debris, and most of the debris can be used for refilling or reuse. Moreover, the equipment and trucks used by Aussie Hydro-Vac Services for its non-destructive digging operations can be placed away from the excavation site. This way, non-destructive digging is a preferred method of digging in congested areas as there is minimum disruption to the traffic. Aussie Hydro-Vac Services also offers a range of non-destructive digging and non-destructive excavation services that include industrial cleaning and shutdowns, drain cleaning and culvert cleaning, and liquid & solid waste disposal. Technical services provided by Aussie Hydro-Vac Services include subsurface engineering & maintenance, surveying services, cable & pipe location, and engineering capabilities. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
September 2022
Categories |